How to eliminate risk of non-compliance with OSHA regulation 1910.242(b)

 

Two ways to prevent non-compliance of OSHA 1910.242(b)

Either by regulating the pressure by means of an air pressure reducer or a specially designed nozzle. The air gun can either reduce the pressure by means of a built-in pressure reducer or by the use of technology that reduces the pressure in the event of a total blockage.

To avoid non-compliance with OSHA 1910.242(b), the pressure must be under 30 psi when the air leaves the blowing system. An air pressure OSHA gauge is the easiest way to find out the air pressure.

 

OSHA regulations state the following about compressed air:
Compressed air may only be used for cleaning if

  1. the pressure is lower than 30 psi (210 kPa)
  2. chip guards and personal safety equipment are used.

 

What does the OSHA regulation mean?

The downstream pressure of the air at the outlet of the air blow gun, nozzle, or pipe opening is not allowed to exceed 30 psi (210 kPa) for all static conditions.  A higher static pressure could cause serious injury to the operator.  Therefore, to minimize the risk of injury in the event of total blockage, the pressure at the blockage should be less than 30 psi (210kPa). An air pressure gauge is the easiest way to check air pressure.


Chip guards are used to protect the operator and people working in the vicinity from flying chips and particles. They can either be screens or other solutions to prevent eye and body injuries. It is important to keep in mind that some safety equipment only protects the operator and these may need to be supplemented in order to protect people nearby. Furthermore, personal safety equipment such as hearing protection and full-cover goggles must be used.

Silvent can help you eliminate the risk of non-compliance with OSHA 1910.242(b), while maintaining an effective blowing force. All Silvent air guns feature the optimal combination of high blowing force, low energy consumption and low noise levels.

Do you want to combine an safe and efficient blowing? Read more about the special technique that make it possible.

All posts

OSHA compliant air blow guns – avoid the Hearing Conservation Program

Read more
Silvent-man-with-helmet-noise

Quiet air blow guns with high blowing force

Read more
Steel application

How to safely clean away metal fluids by blowing with compressed air

Read more

What is a safe air blow gun?

Read more
Silvent-flowmeter

How to convert compressed air consumption from Nl/minute to Nm3/hour

Read more
silvent-nozzles-in-machine-darker

When should you replace air blow guns with air nozzles?

Read more
Kulventil3

Dangers with ball valves - use air blow guns with high blowing force

Read more
Silvent-Air Nozzles-shade_2

Fluid nozzles vs. air nozzles for compressed air

Read more
Silvent-hearing-protection-1

3 truths about noise and compressed air in industry

Read more
Cold-mill-Silvent

Minimize problems with emulsion in cold rolling mills with the use of compressed air

Read more

3 arrangements that improve safety when blowing with compressed air

Read more
working-environment-woman

Basic information about decibel (dB)

Read more
working-environment-tinnitus-hearing-loss.jpg

Decrease noise from air wands and valves for compressed air in industry

Read more
working-environment-air-in-bloodstream-fatal.jpg

What is sound?

Read more
Silvent-man-helmet-ear

Decrease the sound level in the manufacturing industry - 7 tips

Read more
silvent-world-wide-flags

Noise laws in the manufacturing industry

Read more
silvent-innovation-drawing.jpg

Choose the correct air nozzle for compressed air blowing

Read more
Man-with-Pro One-airgun-OSHA-gauge-1500pxl

How do you know if you are using a safe air blow gun?

Read more

When to use an air blow gun with an extension pipe

Read more
air-nozzle-compressed-air

Improve your blowing application with air nozzles for compressed air

Read more

Big saving possibilities when blowing with compressed air

Read more
Silvent-man-with-helmet

Risk of eye injuries, when blowing with an air blow gun

Read more

5 reasons to use air nozzles when blowing with compressed air

Read more

How to install an air blow gun

Read more

How often should you change pneumatic mufflers to avoid downtime?

Read more
Woman-in-Silvent-logistics

Pressure drop, a forgotten problem

Read more

Why should you use a flowmeter?

Read more
working-environment-injuries1

Why to use quiet air blow guns

Read more
Silvent-engineer-checking-nozzle

What does compressed air cost?

Read more
Silvent-man-in-laboratory

How to eliminate risk of non-compliance with OSHA regulation 1910.242(b)

Read more

Dangers of blowing with air blow guns for compressed air

Read more

What is compressed air and what is it used for?

Read more

What is tinnitus?

Read more