Decrease the sound level in the manufacturing industry - 7 tips


The manufacturing industry often ranks high in lists of work places with too high noise levels. This effects the employees, which risk getting hearing damage and tinnitus. To this day, there is no cure to these injuries, which means that the people that are injured have to live with the consequences the rest of their lives. Therefore, it is important to actively work to decrease the noise in the industry. A common noise source is blowing with compressed air, which often is performed with the help of a air blow gun. However, noise is not just harmful; it is also costly, both for the society and for the company. Below follows measures that manufacturing industries with too high sound levels should follow, to decrease the noise in the work place. 

7 tips how you can decrease the noise

After carefully mapping out the noise, you can formulate a proposal for an action plan. It is important for employees and health and safety representatives to have the opportunity to submit proposals and opinions. In many cases, a combination of measures may be needed, such as:

  • Measures right at the machine or noise source
  • Enclosing the noise source
  • Replacement of machinery and equipment with quieter models
  • Replacement or change in work practices
  • Measures in the work area involving e.g. sound absorbing materials and screens
  • Sound insulation in the control or supervision cab
  • Job rotation

 

Make continuous sound measurements

Man-with-helmet-ear-blog.jpg

These are easily made with an sound level meter. The measurement is carried out by aiming the meter’s microphone toward the sound source, at a distance of one meter (1 m) and at a 90° angle to the direction of the sound. To measure the equivalent noise level during an eight-hour shift, a dosimeter is worn by the person whose noise exposure is to be measured. A dosimeter is a meter that the individual carries that measures the total noise that a person has been exposed to during the measurement period.

Start by measuring the noise to which individual employees are exposed. The general noise level should also be measured, but note that it is important for the measurements to be made during representative working conditions. Compare the levels measured with the limits in the noise regulations.

To get further knowledge it could be a good idea to use “noise maps”. An expert in the field should do this work.

What else can you do?

men-talking-in-a-factory.jpg

The most efficient measure in a noisy work environment is to eliminate noise at the sound-source. This can be done by replacing the traditional, loud machinery and production processes with new noise-reducing methods that often also is capital-intensive. The alternative method regarding protection against noise in the workplace is to teach employees how to safely use hearing protection. It is important that the employees know and understand why they should use hearing protection and what can happen if they do not use them. Even short periods without hearing protection can cause injuries.

It is also important to choose the right hearing protection. The choice of appropriate hearing protection depends on the relevant noise situation in the workplace. Hearing protection must have the right acoustic properties so that it insulates at the frequencies where noise is present.

Follow our guidelines for noise measurements!  Read Silvent's guidelines, for noise level measurements when blowing with  compressed air.

 INFO_pdf_Noise_EN

All posts

OSHA compliant air blow guns – avoid the Hearing Conservation Program

Read more
Silvent-man-with-helmet-noise

Quiet air blow guns with high blowing force

Read more
Steel application

How to safely clean away metal fluids by blowing with compressed air

Read more

What is a safe air blow gun?

Read more
Silvent-flowmeter

How to convert compressed air consumption from Nl/minute to Nm3/hour

Read more
silvent-nozzles-in-machine-darker

When should you replace air blow guns with air nozzles?

Read more
Kulventil3

Dangers with ball valves - use air blow guns with high blowing force

Read more
Silvent-Air Nozzles-shade_2

Fluid nozzles vs. air nozzles for compressed air

Read more
Silvent-hearing-protection-1

3 truths about noise and compressed air in industry

Read more
Cold-mill-Silvent

Minimize problems with emulsion in cold rolling mills with the use of compressed air

Read more

3 arrangements that improve safety when blowing with compressed air

Read more
working-environment-woman

Basic information about decibel (dB)

Read more
working-environment-tinnitus-hearing-loss.jpg

Decrease noise from air wands and valves for compressed air in industry

Read more
working-environment-air-in-bloodstream-fatal.jpg

What is sound?

Read more
Silvent-man-helmet-ear

Decrease the sound level in the manufacturing industry - 7 tips

Read more
silvent-world-wide-flags

Noise laws in the manufacturing industry

Read more
silvent-innovation-drawing.jpg

Choose the correct air nozzle for compressed air blowing

Read more
Man-with-Pro One-airgun-OSHA-gauge-1500pxl

How do you know if you are using a safe air blow gun?

Read more

When to use an air blow gun with an extension pipe

Read more
air-nozzle-compressed-air

Improve your blowing application with air nozzles for compressed air

Read more

Big saving possibilities when blowing with compressed air

Read more
Silvent-man-with-helmet

Risk of eye injuries, when blowing with an air blow gun

Read more

5 reasons to use air nozzles when blowing with compressed air

Read more

How to install an air blow gun

Read more

How often should you change pneumatic mufflers to avoid downtime?

Read more
Woman-in-Silvent-logistics

Pressure drop, a forgotten problem

Read more

Why should you use a flowmeter?

Read more
working-environment-injuries1

Why to use quiet air blow guns

Read more
Silvent-engineer-checking-nozzle

What does compressed air cost?

Read more
Silvent-man-in-laboratory

How to eliminate risk of non-compliance with OSHA regulation 1910.242(b)

Read more

Dangers of blowing with air blow guns for compressed air

Read more

What is compressed air and what is it used for?

Read more

What is tinnitus?

Read more